Skip to main content

Bethlehem Steel Corporation - Stock Certificate

Inv# GS5006
Bethlehem Steel Corporation - Stock Certificate
State(s): Delaware
Years: 1957

Stock printed by American Bank Note Company.

The Bethlehem Steel Corporation was an American steel and shipbuilding company that for much of the 20th century was one of the world's largest steel producing and shipbuilding companies. The company's roots trace to 1857 with the establishment of the Bethlehem Iron Company in Bethlehem, Pennsylvania. Bethlehem Steel was formed in 1904 through the merger of the earlier companies, and existed through the decline of American steel manufacturing during the 1970s until its bankruptcy in 2001 and final dissolution in 2003.

The Bethlehem Steel Company became the primary subsidiary company of the Bethlehem Steel Corporation in 1904. The Bethlehem Steel Company is the first Bethlehem Steel while the Bethlehem Steel Corporation is the second Bethlehem Steel; both companies existed simultaneously after 1904, but the Bethlehem Steel Company was eventually merged into the Bethlehem Steel Corporation in the 1960s. After a decline in the American steel industry and other problems leading to the company's bankruptcy in 2001, the Corporation was dissolved and its remaining assets were sold to International Steel Group in 2003.

The Bethlehem Steel Corporation (using the Bethlehem Steel Company) and the Bethlehem Shipbuilding Corporation, which was also a Bethlehem Steel Corporation subsidiary, were two of the most powerful symbols of American industrial manufacturing leadership. Their demise is often cited as one of the most prominent examples of the U.S. economy's shift away from industrial manufacturing, its failure to compete with global competition, and management's penchant for short-term profits.

The Saucona Iron Company was established by Augustus Wolle. The Panic of 1857, a national financial crisis, halted further organization of the company and construction of the works. Eventually, the organization was completed, the site moved elsewhere in the Borough of South Bethlehem, and the company's name was changed to the Bethlehem Rolling Mill and Iron Company. On June 14, 1860, the board of directors of the fledgling company elected Alfred Hunt president.

On May 1, 1861, the company's title was changed again, this time to the Bethlehem Iron Company. Construction of the first blast furnace began on July 1, 1861, and it went into operation on January 4, 1863. The first rolling mill was built between the spring of 1861 and the summer of 1863, with the first railroad rails being rolled on September 26. A machine shop, in 1865, and another blast furnace, in 1867, were completed. During its early years, the company produced rails for the rapidly expanding railroads and armor plating for the US Navy.

Although the company continued to prosper during the early 1880s, its share of the rail market began to decline in the face of competition from growing Pittsburgh and Scranton-based firms such as the Carnegie Steel Company and Lackawanna Steel. The nation's decision to rebuild the United States Navy with steam-driven, steel-hulled warships reshaped Bethlehem Iron Company's destiny.

Following the American Civil War, the Navy quickly downsized after the end of hostilities, as national energies were redirected toward settling the West and rebuilding the war-ravaged South. Almost no new ordnance was produced, and new technology was neglected. By 1881, international incidents highlighted the poor condition of the U.S. fleet and the need to rebuild it to protect U.S. trade and prestige.

In 1883, Secretary of the Navy William E. Chandler and Secretary of the Army Robert Todd Lincoln appointed Lt. William Jaques to the Gun Foundry Board. Jaques was sent on several fact-finding tours of European armament makers and on one of these trips he formed business ties with the firm of Joseph Whitworth of Manchester, England. He returned to America as Whitworth's agent and, in 1885, was granted an extended furlough to pursue this personal interest.

Jaques was aware that the U.S. Navy would soon solicit bids for the production of heavy guns and other products such as armor that would be needed to further expand the fleet. Jaques contacted the Bethlehem Iron Company with a proposal to serve as an intermediary between it and the Whitworth Company, so that Bethlehem could erect a heavy-forging plant to produce ordnance. In 1885, John F. Fritz ("Father of the U.S. Steel Industry"), accompanied by Bethlehem Iron Company directors Robert H. Sayre, Elisha Packer Wilbur (President of the Lehigh Valley Railroad), William Thurston, and Joseph Wharton (who had founded the Wharton School of the University of Pennsylvania in 1881) met with Jaques in Philadelphia. In early 1886, a contract between Bethlehem Iron and the Whitworth Company had been executed.

In spring 1886, Congress passed a naval appropriations bill that authorized the construction of two armored second-class battleships, one protected cruiser, and one first-class torpedo boat, and the complete rebuilding and modernization of two Civil War-era monitors. The two second-class battleships (the USS Texas and the USS Maine) would have both large-caliber guns (12-inch and 10-inch respectively) and heavy armor plating. Bethlehem secured both the forging and armor contracts on June 28, 1887.

Between 1888 and 1892, the Bethlehem Iron Company completed the first U.S. heavy-forging plant. It was designed by John Fritz with the assistance of Russell Davenport, who had entered Bethlehem's employ in 1888. By autumn 1890, Bethlehem Iron was delivering gun forging to the U.S. Navy and was completing facilities to provide armor plating.

During the 1893 Chicago World's Fair, a structure that was designed to make the world marvel received its giant axle from Bethlehem Iron. The world's first Ferris wheel needed enough steel to assemble a 140-foot tower to support an all-steel wheel, altogether making a 264-foot (80 m) structure. The iron made in Bethlehem Steel's blast furnaces was responsible for the world's largest single piece of cast iron that had ever been made up to that time.

In 1898, Frederick Taylor joined Bethlehem Steel as a management consultant in order to solve an expensive machine shop capacity problem. Taylor and Maunsel White, with a team of assistants, applied a series of management principles established by Taylor and that later would be known as scientific management to increase mass production.

The Bethlehem Iron Company was very successful and profitable. The corporate ownership of the Bethlehem Iron Company believed that it could be even more profitable. To accomplish that goal, the corporate ownership of the Bethlehem Iron Company switched to steel production; the steel production became known as a new company called Bethlehem Steel Company.

In 1899, the Bethlehem Steel Company was established. This was the first company to carry the name Bethlehem Steel. The Bethlehem Steel Company (also known as Bethlehem Steel Works) was incorporated to take over all liabilities of the Bethlehem Iron Company. The Bethlehem Iron Company and the Bethlehem Steel Company were separate companies under the same ownership. The Bethlehem Steel Company leased the properties that were owned by the Bethlehem Iron Company.

In 1901, Charles M. Schwab (no relation to the stockbroker Charles R. Schwab), purchased the Bethlehem Steel Company and made Samuel Broadbent Vice President. During this time, the company's lease with the Bethlehem Iron Company came to an end (canceled) as the Bethlehem Steel Company gained control of all properties from the Bethlehem Iron Company; the Bethlehem Iron Company ceased operations.

Schwab transferred his ownership of the Bethlehem Steel Company to the United States Steel Corporation (U.S. Steel), the company he was president of. This period was brief; Schwab repurchased Bethlehem Steel Company, then sold it to the United States Shipbuilding Company. The United States Shipbuilding Company owned Bethlehem Steel Company only a brief time. The United States Shipbuilding Company was in turmoil; its subsidiaries, including the Bethlehem Steel Company, contributed to the United States Shipbuilding Company's problems. Schwab again became involved with Bethlehem Steel Company, through the parent company, the United States Shipbuilding Company.

The United States Shipbuilding Company planned in 1903 to reorganize as the Bethlehem Steel and Shipbuilding Company, this would be the second company to use the name Bethlehem Steel. However, the United States Shipbuilding Company was not reorganized as the Bethlehem Steel and Shipbuilding Company; instead a plan was drawn up for a new company to be formed to replace the United States Shipbuilding Company. The new company would take the "Bethlehem Steel and Shipbuilding Company" name. The plan was carried out in 1904, but the new company did not take the "Bethlehem Steel and Shipbuilding Company" name; instead, it was named Bethlehem Steel Corporation.

The Bethlehem Steel Corporation was formed by Schwab, who had recently resigned from U.S. Steel, and by Joseph Wharton who founded the Wharton School in Philadelphia. Schwab became the first president and first chairman of the board of directors.

After its formation, the Bethlehem Steel Corporation purchased the Bethlehem Steel Company and the remaining subsidiaries from the United States Shipbuilding Company; the Bethlehem Steel Corporation did not purchase the United States Shipbuilding Company. The Bethlehem Steel Company became a subsidiary of the Bethlehem Steel Corporation, though the Bethlehem Steel Company also had subsidiaries of its own. Bethlehem Steel Corporation became the second largest steel provider in the United States with the help of its subsidiary Bethlehem Steel Company. Both the Bethlehem Steel Company and the Bethlehem Steel Corporation existed simultaneously after 1904. Bethlehem Steel Company was eventually merged into Bethlehem Steel Corporation in the 1960s.

Bethlehem Steel Corporation installed the gray rolling mill and produced the first wide-flange structural shapes to be made in America. These shapes were partly responsible for ushering in the age of the skyscraper and establishing Bethlehem Steel as the leading supplier of steel to the construction industry.

In the early 1900s Samuel Broadbent led an initiative to diversify the company. The corporation branched out from steel, with iron mines in Cuba and shipyards around the country. In 1913, under Broadbent, it acquired the Fore River Shipbuilding Company of Quincy, Massachusetts, thereby assuming the role of one of the world's major shipbuilders. In 1917, it incorporated its shipbuilding division as Bethlehem Shipbuilding Corporation, Limited. In 1922, it purchased the Lackawanna Steel Company, which included the Delaware, Lackawanna and Western Railroad as well as extensive coal holdings.

During World War I and World War II, Bethlehem Steel was a major supplier of armor plate and ordnance to the U.S. armed forces, including armor plate and large-caliber guns for the Navy.

In the 1930s, the company made the steel sections and parts for the Golden Gate Bridge and built for Yacimientos Petrolíferos Fiscales (YPF), a new oil refinery in La Plata City, Argentina, which was the tenth-largest in the world. During World War II, as much as 70 percent of airplane cylinder forgings, one-quarter of the armor plate for warships, and one-third of the big cannon forgings for the U.S armed forces were turned out by Bethlehem Steel.

Bethlehem Steel ranked seventh among United States corporations in the value of wartime production contracts. Bethlehem Shipbuilding Corporation's 15 shipyards produced a total of 1,121 ships, more than any other builder during the war and nearly one-fifth of the U.S. Navy's two-ocean fleet. It employed as many as 180,000 persons, the bulk of the company's total employment of 300,000.

Eugene Grace was president of Bethlehem Steel from 1916 to 1945, and chairman of the board from 1945 until his retirement in 1957. Eugene Grace orchestrated Bethlehem Steel's wartime efforts. In 1943, he promised President Roosevelt one ship per day, and exceeded the commitment by 15 ships.

The war effort drained Bethlehem of much of its male workforce. The company hired female employees to guard and work on the factory floor or in the company offices. After the war, the female workers were promptly fired in favor of their male counterparts.

On Liberty Fleet Day, September 27, 1941, President Franklin D. Roosevelt was present at the launching of the first Liberty ship SS Patrick Henry at Bethlehem's Bethlehem Fairfield Shipyard in Baltimore, Maryland. Also launched that same day were the Liberty SS James McKay at Bethlehem Sparrows Point Shipyard, Sparrows Point, Maryland, and the emergency vessel SS Sinclair Superflame at the Fore River Shipyard in Quincy, Massachusetts.

When peacetime came, the plant continued to supply a wide variety of structural shapes for the construction trades. Galvanized sheet steel under the name BETHCON was widely produced for use as duct work or spiral conduit.

Additionally, the company produced forged products for defense, power generation, and steel-producing companies.

From 1949 to 1952, Bethlehem Steel had a contract with the federal government of the United States to roll uranium fuel rods for nuclear reactors in Bethlehem Steel's Lackawanna, New York, plant. Workers were not aware of the dangers of the hazardous substance and were not given protective equipment. Some workers have since attempted to receive compensation under a year 2000 radiation-exposure law. The law required the Labor Department to compensate workers up to $150,000 if they developed cancer later in life, if their work history involved enough radiation exposure to significantly increase their cancer risk. The Bethlehem Steel workers have not been awarded this compensation because the radiation dose involved in processing fresh uranium fuel is low, and produces a small risk relative to the baseline risk. The larger danger in processing uranium is chemical poisoning from the heavy metal, which does not produce cancer.)

The steel industry in the U.S. prospered during and after World War II, while the steel industries in Germany and Japan lay devastated by Allied bombardment. Bethlehem Steel's high point came in the 1950s, as the company began manufacturing 23 million tons per year. In 1958, the company's president, Arthur B. Homer, was the highest-paid U.S. business executive. The firm built its largest plant, at Burns Harbor, Indiana, between 1962 and 1964.

The late 1960s offered a harbinger of the troubled times to come. In 1967, the company lost its bid to provide the steel for the original World Trade Center. The contracts, a single one of which was for 50,000 tons of steel, went to competitors in Seattle, St. Louis, New York and Illinois.

The U.S. advantage lasted about two decades, during which the U.S. steel industry operated with little foreign competition. But eventually, the foreign firms were rebuilt with modern techniques such as continuous casting, while profitable U.S. companies resisted modernization. Bethlehem experimented with continuous casting but never fully adopted the practice.

Meanwhile, the average age of the Bethlehem workforce was increasing, and the ratio of retirees to workers was rising, meaning that the value created by each worker had to cover a greater portion of pension costs than before. Former top manager Eugene Grace had failed to adequately invest in the company's pension plans during the 1950s. When the company was at its peak, the pension payments that should have been made were not. As a result, the company encountered difficulty when it faced rising pension costs and diminishing profits.

By the 1970s, imported foreign steel was generally cheaper than domestically produced steel. The company faced growing competition from mini-mills, smaller-scale operations that could sell steel at lower prices.

In 1982, Bethlehem reported a loss of US$1.5 billion and shut down many of its operations. Profitability returned briefly in 1988, but restructuring and shutdowns continued through the 1990s.

In the mid-1980s, demand for the plant's structural products began to diminish, and new competition entered the marketplace. Lighter construction styles, in part due to lower-height construction styles (i.e., low-rise buildings), did not require the heavy structural grades produced at the Bethlehem plant.

In 1991, Bethlehem Steel Corporation discontinued coal mining (under the name BethEnergy). Bethlehem Steel exited the railroad car business in 1993.

At the end of 1995, it closed steel-making at the main Bethlehem plant. After roughly 140 years of metal production at its Bethlehem, Pennsylvania plant, Bethlehem Steel Corporation ceased its Bethlehem operations.

The Bethlehem Steel Corporation ceased shipbuilding activities in 1997 in an attempt to preserve its steel-making operations. The Bethlehem Steel Corporation would file for bankruptcy in 2001 and dissolve in 2003.

Despite the closing of its local operations, the Bethlehem Steel Corporation tried to reduce the impact on the Lehigh Valley area with plans to revitalize the south side of Bethlehem. It hired consultants to develop conceptual plans on the reuse of the massive property. The consensus was to rename the 163 acres (66 ha) site Bethlehem Works and to use the land for cultural, recreational, educational, entertainment, and retail development. The National Museum of Industrial History, in association with the Smithsonian Institution and the Bethlehem Commerce Center, consisting of 1,600 acres (650 ha) of prime industrial property, would be erected on the site along with a casino and a large retail and entertainment complex.

Inexpensive steel imports and the failure of management to innovate, embrace technology, and improve labor conditions contributed to Bethlehem Steel's demise.

In 1998, after denied pension benefits, a lawsuit was filed in the 3rd Court of Appeals in Philadelphia: "Lawrence Hollyfield, Fiduciary to the Estate of Collins Hollyfield v. PENSION PLAN OF BETHLEHEM STEEL CORPORATION and Subsidiary Companies;" It was settled in favor of Hollyfield in 2001. It led to a class action lawsuit filed by the workers union soon thereafter. This settlement also led to Pension Benefit Guaranty Corporation (PGBC) assuming all pension payouts from Bethlehem Steel, the largest such assumption in U.S. History.

In 2001, the Bethlehem Steel Corporation filed for bankruptcy. In 2003, the company was dissolved and its remaining assets, including the six plants, were acquired by the International Steel Group. International Steel Group was in turn acquired by Mittal Steel in 2005, which then merged with Arcelor to become ArcelorMittal in 2006.

In 2007, the Bethlehem property was sold to Sands BethWorks with plans to build a casino where the plant once stood were drafted. Construction began in fall 2007; the casino was completed in 2009. Ironically, the casino had difficulty finding structural steel for construction due to a global steel shortage and pressure to build Pennsylvania's tax-generating casinos. 16,000 tons of steel were needed to build the $600 million complex.

The site of the company's original plant in Bethlehem, Pennsylvania, is home to SteelStacks, an arts and entertainment district. The plant's five blast furnaces were left standing and serve as a backdrop for the new campus. SteelStacks currently features the ArtsQuest Center, a contemporary performing arts center, the Wind Creek Bethlehem casino resort (formerly Sands Casino Resort Bethlehem), a gambling emporium, and new studios for PBS member station WLVT-TV (channel 39). The area also includes three outdoor music venues – Levitt Pavilion, a free music venue featuring lawn seating for up to 2,500 people, Air Products Town Square at Steelstacks, and PNC Plaza, which hosts concerts featuring well-known artists. Levitt Pavilion and the casino resort are connected via the Hoover-Mason Trestle linear park.

In 2012, Bethlehem Steel, a three-piece indie rock band, named itself after the company to honor it.

On November 9, 2016, a warehouse being used as a recycling facility that was part of the Lackawanna, New York, Bethlehem Steel Complex caught fire and burned down.

The corporate records of Bethlehem Steel are housed at the Hagley Museum and Library in Wilmington, Delaware and at the National Museum of Industrial History in Bethlehem.

On May 19, 2019, the former Bethlehem Steel headquarters building in the west side of Bethlehem was imploded.

Shipyards

In 1931/32, Bethlehem Steel manufactured 38 electric multiple unit carriages for the Reading Company.

From 1923 to 1991, Bethlehem Steel was one of the world's leading producers of railroad freight cars through their purchase of the former Midvale Steel and Ordnance Company, whose railcar division was at Johnstown, Pennsylvania. Despite its status as a major integrated steel maker, Bethlehem Steel Freight Car Division pioneered the use of aluminum in freight car construction. The Johnstown plant was purchased from Bethlehem Steel through a management buyout in 1991, creating Johnstown America Industries.

The company manufactured the steel for many of the country's most prominent landmarks:

Bethlehem Steel fabricated the largest electric generator shaft in the world, produced for General Electric in the 1950s. It also supplied the steel used for the Wonder Wheel in Coney Island.

Sports:

Read More

Read Less

Item ordered may not be exact piece shown. All original and authentic.
OUT OF STOCK